Driven Media LED Turn Signal Overlay for GR86 and BRZ Tail Lights

Description

Driven Media GR86 / BRZ Tail Light Turn Signal Overlay

OEM 2022+ GR86 and BRZ tail lights utilize a clear turn signal section that contrasts the red of the brake light. These tail light overlays allow you to completely transform the look of the rear end by blending the turn signals into the rest of the black accents on the tail lights and trunk giving you an aggressive and sleek appearance while still allowing your turn signals to shine brightly through.

These overlays are designed and cut in-house using high-quality vinyl to ensure proper fit and finish.

Installation Instructions for DARK SMOKE & LIGHT SMOKE (Dry Application)

• Prior to applying the overlay, make sure the surface is thoroughly cleaned and dry.

• Carefully peel the overlay off of the backing and use the edges of the tail light to line it up. (Each overlay is marked left or right on the backing sheet.)

• Once you have successfully positioned the overlay where you want it, use a vinyl squeegee or microfiber to remove any air bubbles.

• We recommend allowing at least 48hrs before washing the car to allow for the adhesive to cure and avoid directly spraying them with a pressure washer.

• The temperature needs to be a minimum of 65°F for proper application.

Installation Instructions for RED & YELLOW (Wet Application)

• Prior to applying the overlay, make sure the surface is thoroughly cleaned.

• Carefully peel the overlay off of the backing. (Each overlay is marked left or right on the backing sheet.)

• Spray the surface of the lens and the overlay with soapy water. (Dawn Soap recommended, just need a drop or two)

• Position the overlay on the lens using the edges of the tail light to guide you.

• Once you have successfully positioned the overlay where you want it, use a vinyl squeegee or microfiber to remove any air/water bubbles.

• We recommend allowing at least 48hrs before washing the car to allow for the adhesive to cure and avoid directly spraying them with a pressure washer.

• The temperature needs to be a minimum of 65°F for proper application.

Explore more from our collection.